Apartment renovations
Apartment renovations, complete or room by room, coordinated with the building, in Montevideo and Maldonado.
Full and room-by-room apartment renovations in Montevideo and Maldonado, with an in-house team and technical direction.
Grupo Edifica carries out complete and room-by-room apartment renovations in Montevideo and Maldonado, including Punta del Este, José Ignacio and La Barra. Each project is executed by our own team, under technical direction that plans the work, coordinates with the building management and is accountable for the result.
What an apartment renovation includes
- Complete renovation
- Layout reconfiguration
- Kitchens and bathrooms
- Diagnosis and treatment of damp and cracks
- Renewal of plumbing and electrical installations
- Flooring, wall coverings, painting, carpentry, doors, windows and glazing
- Integrated fit-out and equipment
Complete renovation
The whole unit under a single plan, from demolition to handover.
Work on the entire unit: installations, finishes, kitchen, bathrooms and equipment, with a single plan that sets the sequence of trades from demolition through to handover.
Layout reconfiguration
Merging rooms, adding a bathroom or bedroom, or reorganising the apartment layout.
Opening the kitchen onto the living area, adding a bathroom or a bedroom, enlarging rooms or reorganising circulation. This is achieved by demolishing non-structural partitions and building new partition walls.
Kitchens and bathrooms
The rooms with the greatest impact on how the unit is used and valued.
These are the rooms that concentrate installations, wall coverings and equipment, and those with the greatest impact on the use and value of the unit.
Damp
The source of damp is identified before any work, whether in the unit or the building.
In apartments, damp may originate in the unit itself, in a neighbouring unit, in the façade or in shared installations. The diagnosis identifies the source before any intervention, which determines whether the repair belongs to the unit or must be coordinated with the building management. Grupo Edifica's management holds a specialisation in Building Pathology (Universidad ORT Uruguay).
Coordination with the building management and the co-ownership regulations
Coordination with building management is part of the service, so the owner does not have to step in.
Works in an apartment are governed by the building's co-ownership regulations and by the provisions of its management. Grupo Edifica takes on this coordination as part of the service, so that the owner does not need to act as intermediary between the works and the building.
Working hours
Work within permitted hours, with noisy tasks kept to the allowed time slots.
Work is scheduled within the days and hours permitted by the building. The noisiest tasks, such as demolition or drilling, are concentrated within the permitted time slots.
Use of lifts and common circulation
Agreed use of the service lift, with the car and routes protected.
The use of the service lift or the authorised circulation routes for bringing in materials and removing debris is agreed with the building management, with protection of the lift car and the routes used.
Protection of common areas
Common areas protected and cleaned at the end of each working day.
Floors, walls and doors in the common areas used by the works are protected and cleaned at the end of each working day.
Debris removal
Debris bagged and removed regularly, never stored in common areas.
Debris is bagged inside the unit and removed regularly, along the agreed routes and at the agreed times, with no storage in common areas.
Communication with the building management
Scope, schedule and utility shut-offs communicated in advance.
The building management is informed of the scope of the works, the schedule and the people in charge, and any water or electricity shutoffs affecting shared installations are coordinated in advance.
What can be modified in an apartment
Before any layout change, structural elements and shared services crossing the unit are surveyed.
In a building, the structure and the shared installations do not belong to a single unit. Before designing a new layout, a survey identifies which elements are structural and which installations run through the unit.
- Structural walls, columns and beams: they are not demolished or drilled without a technical assessment of the building's design
- Drainage and supply risers: they determine where kitchens and bathrooms can be located and set the slopes required for new installations
- Ventilation and shared service ducts: they are kept in operation
- Floor slabs: conduits and changes in level are resolved within the limits each building allows
- Façades and exterior windows: their modification is usually subject to the provisions of the co-ownership regulations
Renovating to live in, rent out or sell
The intended use of the apartment guides the renovation decisions.
To live in
Layout, storage, lighting and finishes designed around how the occupants live.
The renovation is designed around the lifestyle of those who will occupy it: layout, storage, lighting, equipment and finishes defined according to their needs, with interior design and custom furniture where appropriate.
To rent out
Durable finishes, easy maintenance and full equipment for rental.
Priority is given to durable finishes, renewed installations, easy maintenance and complete equipment, for both long-term and short-term rentals.
To sell
Damp, finishes, kitchen and bathrooms: what most affects value and time to sell.
Preparation focuses on resolving damp, worn finishes, the kitchen and bathrooms, which are the aspects that most affect the perceived value of the unit and the time it takes to sell.
Renovation, interior design and fit-out in a single project
Interior design, equipment and bespoke furniture in the same contract, with services sized to the chosen equipment.
An apartment renovation can incorporate interior design and fit-out within the same contract. Appliances, lighting, air conditioning, water heater, sanitaryware and faucets and fittings are defined from the design stage, so that installations are located and sized according to the chosen equipment.
Equipment is selected independently of brands. Custom furniture is designed by Grupo Edifica, which quotes it with manufacturers, supervises its manufacture and coordinates its installation.
Our method
- 01
Site survey
Site visit, survey of the space and analysis of needs.
Technical visit, survey of the space and its current condition, and analysis of the client's needs.
- 02
Scope definition
Which disciplines are involved and what each one covers.
Which disciplines are involved (architecture, interior design, renovation, fit-out) and which trades each one includes.
- 03
Design
Design, material selection, works planning and budget.
Architectural and interior design development, selection of materials and finishes, construction planning and budget.
- 04
Execution
Works and assembly by our own team, under technical direction.
Construction, installations and assembly by our own team, under technical direction and with coordination of all trades.
- 05
Handover and after-sales service
Final handover, warranty on the work and follow-up after completion.
Team
Over 25 years' experience, an in-house team and work for Kaplan and OX Desarrollos.
More than 25 years of combined experience in construction, site management, technology and project management. In-house construction and installation team. Track record in the comprehensive fit-out of residential buildings for real estate developers such as Kaplan and OX Desarrollos.
Frequently asked questions
It includes a site survey, scope definition, design, coordination with the building management, execution by our own team, technical direction, and handover with after-sales service. It can incorporate interior design and fit-out within the same contract.
Grupo Edifica. The building management is informed of the scope and schedule, working hours, lift use and routes for materials and debris are agreed, and service shutoffs affecting shared installations are coordinated in advance.
Non-structural partitions can be demolished and relocated. Structural walls, columns and beams are not modified without a technical assessment. Before designing a new layout, a survey identifies which elements are structural and which shared installations run through the unit.
It is possible within the limits set by the drainage risers and the slopes required for the new installations. The site survey determines which locations are feasible before the design is developed.
First, its source is diagnosed. If it comes from a neighbouring unit, the façade or shared installations, it is documented and the repair is coordinated with the building management before the affected finishes are renewed.
A unit with damp, worn finishes or an outdated kitchen and bathrooms loses perceived value and takes longer to rent or sell. The renovation focuses on resolving these aspects with finishes and equipment suited to the intended use of the unit.
In Montevideo and in Maldonado, including Punta del Este, José Ignacio and La Barra.
Contact
Let us arrange a meeting to understand your needs and assess the most suitable solution for your project.