Custom furniture
Custom furniture for each space, with supervised manufacturing and installation in Montevideo and Maldonado.
Custom furniture designed for each space, with supervised manufacturing and installation, in Montevideo and Maldonado.
We design custom furniture for homes, offices and shops, and oversee manufacturing, installation and after-sales.
Grupo Edifica designs custom furniture for homes, offices and commercial spaces in Montevideo and Maldonado, and manages its manufacture through specialised workshops and manufacturers. The service covers the site survey and measurement, design with professional renders, selection of materials and hardware, comparative quoting, supervision of manufacturing and installation, and after-sales service.
Furniture conceived for the space and for its use
Made to measure, furniture uses all the available space and its interior fits what it will hold.
Standard furniture is designed for generic dimensions. In practice, spaces have out-of-square walls, recesses, columns, changes in level, doors and windows and building services that condition every available centimetre. Custom furniture addresses those conditions from the design stage and makes full use of the available space.
It also makes it possible to define the interior of each piece according to what it will hold and how it will be used: shelf heights, drawer depths, placement of hardware and accessories, and the relationship with the rest of the room. The result is a piece that responds to a specific need and integrates with the interior design project in materials, colours and proportions.
The process of a custom piece
- 01
Site survey and measurement
Precise measurement of the space, its services and each piece's intended use.
Visit to the space, precise measurement, recording of walls, floors, doors and windows and existing electrical and plumbing installations, and analysis of the intended use of each piece. In spaces under renovation, final measurements are taken when the works allow, so that the design is based on finished dimensions.
- 02
Design
Detail drawings: dimensions, modules, interior, fronts and hardware.
Design proposal with detailed drawings: dimensions, modules, interior layout, type of doors and fronts, and placement of hardware, accessories and lighting.
- 03
Render and review
Renders with real materials and revisions until approval.
Professional renders showing the piece in context, with actual materials and finishes, and review rounds until final approval of the design.
- 04
Selection of materials and hardware
Boards, fronts and hardware chosen by use, moisture and budget.
Specification of boards, fronts, edging, finishes and hardware according to use, exposure to moisture and the project budget.
- 05
Comparative quoting
Quotes from several workshops on the same documentation.
Quotes from workshops and manufacturers based on the same technical documentation, to compare prices, lead times and production capacity on equal terms.
- 06
Manufacturing supervision
Check of dimensions, materials and finishes before delivery.
Monitoring of manufacturing by Grupo Edifica: verification of dimensions, materials, hardware and finishes against the approved design, before delivery.
- 07
Supervised installation
Coordinated, supervised assembly: leveling, adjustments and finishes.
Coordination of delivery and assembly with the other works in the space, and supervision of installation: levelling, plumbing true, adjustment of doors and drawers, and finishing of junctions with walls and floors.
- 08
After-sales service
Adjustments and claims with Grupo Edifica as single point of contact.
Management of adjustments and claims with the manufacturer, with Grupo Edifica as the client's single point of contact.
Materials and hardware
Material defines finish, durability and cost; it is chosen by room and use.
The choice of material determines the finish, durability and cost of each piece. It is selected according to the room, the type of use and the desired result.
Melamine
Good cost-to-durability ratio; common in closets, kitchens and offices.
Melamine-faced boards, available in solid colours, textures and wood-effect designs. They offer a good balance between cost and resistance to everyday use, and are common in wardrobe interiors, kitchens and office furniture.
Lacquered finishes
Seamless matte or gloss surfaces; need more care under heavy use.
Fronts with a matt or gloss lacquered finish, in the colour defined by the project. They allow continuous, uniform surfaces and require more care in areas of intensive use.
Wood veneer
Natural wood grain with more stability than solid wood.
Boards faced with natural wood veneer, which provide the grain and texture of wood with greater dimensional stability than solid timber. They are finished with varnishes or lacquers depending on use.
Solid wood
For pieces where wood takes center stage, chosen by moisture and use.
For pieces in which wood is the protagonist, such as tops, open shelves or living room furniture. It requires careful selection of species and finish according to the humidity and use of the room.
Hardware
They define daily function and durability; specified at design stage.
Hinges, drawer runners, sliding door systems, lift-up systems, interior accessories and handles. Hardware determines the day-to-day operation and durability of the furniture, and is specified in the design together with its placement.
What can be custom designed
- Kitchens
- Built-in wardrobes
- Walk-in closets
- Bathroom vanities
- Bookshelves
- Media units and living room furniture
- Desks and home workspaces
- Retail furniture: counters, displays and store fixtures
- Corporate furniture: reception desks, workstations and meeting rooms
Design and control, without in-house manufacturing
We do not manufacture: we choose the right workshop for each piece and answer for the result.
Grupo Edifica does not manufacture furniture. It works with specialised workshops and manufacturers and takes responsibility for ensuring that each piece is manufactured and installed according to the approved design.
This model makes it possible to choose the right manufacturer for each type of piece, without depending on a single workshop, and to maintain independent control over the quality of the result.
- Designs each piece and prepares the technical documentation for its manufacture
- Manages quotes from manufacturers
- Supervises manufacturing
- Coordinates and supervises installation
- Manages after-sales service with the manufacturer
Furniture integrated with the renovation and the fit-out and equipment
Hire it alone or within a renovation or interior project, with the works planned around the furniture.
Custom furniture can be contracted as a stand-alone service or as part of an interior design project, a renovation or the fit-out and equipment of a space. When integrated, the location of outlets, drains, lighting and appliances is defined around the furniture from the outset, and the works are carried out to the dimensions the furniture requires.
Team
Over 25 years of combined experience, in-house team, work for Kaplan and OX Desarrollos.
More than 25 years of combined experience in construction, site management, technology and project management. An in-house execution and installation team. Track record in the complete fit-out and equipment of residential buildings for real estate developers such as Kaplan and OX Desarrollos.
Frequently asked questions
No. Grupo Edifica designs each piece, obtains quotes from specialised workshops and manufacturers, supervises manufacturing, coordinates and supervises installation, and manages after-sales service. The client has a single point of contact throughout the process.
Independent supervision verifies that dimensions, materials, hardware and finishes match the approved design before installation. It also makes it possible to choose the most suitable manufacturer for each type of piece rather than depending on a single workshop.
Yes. Each piece is presented with professional renders showing materials, finishes and its position in the space, with review rounds until final approval. Manufacturing begins only once the design has been approved.
The choice depends on the room, the use and the budget. Melamine is often used for interiors and heavy-use furniture; lacquered finishes and wood veneer for fronts with a special finish; and solid wood for pieces where the wood remains visible. The recommendation is included in the design proposal.
Yes. The service applies to an individual piece, such as a bookshelf or a bathroom vanity, or to the complete furniture of a home, office or store.
Final measurements are taken when the works reach a stage that allows finished dimensions to be used, with walls, floors and wall finishes completed or defined. When the renovation is carried out by Grupo Edifica, that sequence is planned within the same schedule.
Grupo Edifica manages after-sales service: it receives the claim, takes it up with the manufacturer and coordinates the necessary adjustments. The client does not need to deal directly with the workshop.
Montevideo and Maldonado, including Punta del Este, José Ignacio and La Barra.
Contact
Let us arrange a meeting to understand your needs and assess the most suitable solution for your project.