Custom kitchens
Custom kitchens designed for everyday use, in Montevideo and Maldonado.
Bespoke kitchen design for homes and offices, with renders, supervised manufacturing and installation, and after-sales.
Grupo Edifica designs custom kitchens for houses and apartments in Montevideo and Maldonado, as well as kitchens and kitchenettes for offices and commercial spaces. The service defines the layout, cabinetry, countertops, hardware, lighting and integration of appliances, with professional renders and supervision of manufacturing and installation.
Kitchen cabinetry is manufactured through specialised workshops and manufacturers. Grupo Edifica designs it, obtains quotes, supervises manufacturing, coordinates and supervises installation, and manages after-sales service.
Kitchen design and kitchen renovation
Kitchen design and renovation can be hired separately or together; combined, the works follow the design exactly.
This page describes kitchen design: how the kitchen is organised, what cabinetry it includes, which materials are used and how appliances are integrated. The works required to carry it out, such as demolition, plumbing and electrical installations, flooring and wall finishes, fall under the kitchen renovation service.
Both services can be contracted separately or together. When combined, installations are placed exactly where the design locates them, and the cabinetry is measured on the finished works.
Layout and workflow
The layout organises storage, washing and cooking to shorten movement and leave free counter space.
The layout defines how the three main work zones relate to each other: storage and refrigeration, washing and preparation, and cooking. A good layout shortens distances, avoids crossing paths and leaves free countertop space between each zone. The choice depends on the shape and size of the space, the location of doors and windows and building services, and the relationship between the kitchen and the rest of the home.
Single-wall
Everything on one wall: ideal for narrow kitchens or open-plan living.
All cabinetry is placed along a single wall. This is the usual solution in narrow kitchens or kitchens open to the living area, and requires a carefully ordered sequence of zones to avoid long distances.
L-shaped
Two adjoining walls: frees the centre and gives continuous worktop.
Cabinetry occupies two adjacent walls. It frees up the centre of the space, allows a table or dining area to be included and offers good countertop continuity.
U-shaped
Three walls: maximum worktop and storage, with work zones close together.
Cabinetry is arranged along three walls. It offers the most countertop and storage space and keeps work zones close together, provided the central aisle is wide enough for comfortable movement.
With island
A central unit for cooking, washing or breakfast, with space all around.
A free-standing unit in the centre of the space, which can house the hob, the sink, storage or a breakfast area. It requires circulation space around its entire perimeter and, if it includes cooking or washing, provision for services in the floor.
With peninsula
An extension of the cabinetry that adds worktop and divides kitchen from living.
An extension of the cabinetry attached to a wall or to another unit. It provides additional work and serving surface and often acts as a boundary between the kitchen and the dining or living area in open-plan spaces.
What kitchen design includes
Cabinetry
Base, wall and tall units, with materials chosen for use and moisture resistance.
Design of base units, wall units and tall units, with specification of heights, depths, interior layout, fronts and finishes. Materials are selected according to use: melamine, lacquered finishes, wood veneer or solid wood, with particular attention to moisture resistance in the washing area.
Countertops
Worktop material, thickness and cut-outs, measured on the installed units.
Selection of countertop material, thickness and finish, and specification of cut-outs for the sink and hob, upstands and junctions with walls and wall finishes. Countertop measurement is coordinated with the installed cabinetry.
Hardware and accessories
Hinges, runners and organisers specified by load and frequency of use.
Soft-close hinges, drawer runners, full-extension drawers, corner units, pull-out larders, interior organisers, waste bins and opening systems. Hardware is specified according to the weight and frequency of use of each unit.
Lighting
General lighting plus task lighting over the worktop, with no shadows.
General room lighting and task lighting over the countertop, usually under the wall units, to avoid shadows in preparation areas. The position of light points, the type of light and the switching are defined.
Appliance integration
Appliances are chosen before the cabinetry, and each unit is designed around them.
Selection of appliances before finalising the cabinetry design: oven, hob, range hood, refrigerator, dishwasher and microwave. Each unit is designed with the dimensions, ventilation and connections required by the appliance it will house, whether fully integrated, built-in or free-standing.
Design process
- 01
Site survey
Measurement of the space, survey of services and analysis of use.
Measurement of the space and recording of doors and windows, existing installations, drains and ventilation, and analysis of how the kitchen is used.
- 02
Layout and appliances
Layout proposal and selection of the appliances to be integrated.
- 03
Design and renders
Detailed drawings and professional renders, revised until approval.
Detailed drawings of the cabinetry, countertop and lighting, and professional renders with review rounds until approval.
- 04
Quoting
Quotes for cabinetry and countertop from manufacturers.
- 05
Manufacturing and installation
Supervised manufacturing, coordinated delivery and installation.
Supervision of manufacturing, coordination of delivery with the works and the appliances, and supervision of assembly.
- 06
After-sales service
Adjustments and claims handled with manufacturers during the warranty.
Management of adjustments and claims with the cabinetry manufacturer and with the appliance manufacturers, for the full term of their warranty.
Coordinated design, works and appliances
With a single team, the design sets every service, and cabinets and appliances go in the right order.
A kitchen brings together cabinetry, countertop, plumbing and electrical installations, wall finishes, lighting and appliances. When each part is handled by a different supplier, dimensional discrepancies and last-minute changes fall on the client. With a single team, the design defines the location of each installation, the works carry it out, and the cabinetry and appliances are installed in the right sequence.
Team
Over 25 years' experience, an in-house team and work for Kaplan and OX Desarrollos.
More than 25 years of combined experience in construction, site management, technology and project management. An in-house execution and installation team. Track record in the complete fit-out and equipment of residential buildings for real estate developers such as Kaplan and OX Desarrollos.
Frequently asked questions
Design defines the layout, cabinetry, countertops, hardware, lighting and integration of appliances. Renovation covers the works: demolition, installations, flooring and wall finishes. Grupo Edifica provides both services, separately or combined.
The cabinets are manufactured through specialised workshops and manufacturers. Grupo Edifica designs each unit, obtains quotes from manufacturers, supervises manufacturing and installation, and manages after-sales service.
The layout is defined according to the shape and size of the space, the location of doors and windows and building services, and the relationship with the rest of the home. The usual options are single-wall, L-shaped, U-shaped, with island or with peninsula, and the proposal is presented with renders before the design is approved.
Each appliance has its own dimensions, ventilation requirements and connections. Defining them first makes it possible to design the units precisely around them and to place outlets, drains and range hood ducts in the right position.
Yes, when existing installations remain in their current location. The design adapts to them, and the cabinetry, countertop, lighting and appliances are renewed. If the new layout requires installations to be moved, a renovation is added.
Yes. Kitchens and kitchenettes are designed for offices, and kitchens and bars for commercial and food and beverage spaces, using the same criteria for layout, materials and appliance integration.
Montevideo and Maldonado, including Punta del Este, José Ignacio and La Barra.
Contact
Let us arrange a meeting to understand your needs and assess the most suitable solution for your project.